How To Pair Kasa Smart Plug With Alexa?

How To Pair Kasa Smart Plug With Alexa
This Article Applies to: RE270K, HS100P3, KB100, EP40, KL130, KL110, HS107, KL110B, HS105 KIT, LB230, HS103, KL130B, LB130, HS300, KP115, HS105, LB110, KD110, HS220, HS200, HS100, RE370K, KB130, KP100, KP400, KL120, KP125, KP200, LB100 TKIT, LB200, HS100 KIT, LB120, KP105, HS210 KIT, LB100, KP303, HS110, HS210 This article will introduce how to connect TP-Link Kasa devices on your Amazon Alexa app.

Please open the Kasa App and sign in to your TP-Link account. No TP-LINK Account ?

Set up Kasa devices via Kasa APP at first and make sure they can be controlled by Kasa APP. Please refer to Smart plug/Switch or Smart Bulb to set up the Kasa device.

Note: For RE270K/RE370K, please make sure Remote Control is enabled on Kasa APP. Refer to this link to enable Remote Control feature for the RE270K/RE370K. Connect Kasa device to Amazon Alexa: 1. Open Amazon Alexa App, tap on “Home” icon in bottom right corner. Then click the “+” icon in the upper right corner and select “Add Device”. How To Pair Kasa Smart Plug With Alexa 2. Select “Kasa Smart” and tap on “Continue”. How To Pair Kasa Smart Plug With Alexa 3. Tap on “ENABLE TO USE”, type in your Kasa account and password, and then click “Authorize”. After authorized successfully, the App will remind that “TP-LINK Kasa has been successfully linked”. Tap “Done” to go to the next step. How To Pair Kasa Smart Plug With Alexa 4. Tap on “DISCOVER DEVICES” or use voice command “Alexa, discover devices”. Alexa will scan and show the devices bound to your Kasa account. How To Pair Kasa Smart Plug With Alexa 5. Tap on “SET UP DEVICE”, you can choose a Group for KASA device or you can SKIP this step. Tap on “DONE” to finish the set up. How To Pair Kasa Smart Plug With Alexa 6. You have now completed the setup process. You can select the device types and view what devices are discovered by Alexa. How To Pair Kasa Smart Plug With Alexa All discovered Kasa devices can be controlled through your Alexa device. Please test if it works normally with voice commands. For example, if a bulb on Kasa is named “Little Bulb”, we can say “Alexa, turn on the Little Bulb” and check if Alexa powers on this bulb.

Alexa fails to discover devices, how can I do?

  • Try to reboot the smart device and re-discover on Alexa.
  • Double check whether Kasa App can remotely control the device or not. If not, check your internet access and remote control settings.

Why does the device’s status Show “Offline” on Alexa?

  • Wireless connection could have been lost. Try reboot the device and re-discover on Alexa.
  • Internet access on your router could be unavailable.
  • The remote control function could have been turned off.
  • There is an issue with the cloud server.

Alexa has discovered the devices but cannot manage them, while via Kasa App you can.

For this situation please contact support for help, Is this faq useful? Your feedback helps improve this site. What’s your concern with this article?

  • Dissatisfied with product
  • Too Complicated
  • Confusing Title
  • Does not apply to me
  • Too Vague
  • Other

We’d love to get your feedback, please let us know how we can improve this content. Thank you We appreciate your feedback. Click here to contact TP-Link technical support.

Why won t my kasa smart plug connect?

Other Common Issues (and How to Fix Them) – However, sometimes everything doesn’t go according to plan. Even though the ten steps outlined above are relatively straightforward, there are still a few issues that can pop up along the way:

Problem Solution
Alexa doesn’t recognize the smart plug. Try to unplug and plug in the smart plug and re-discover it in your Alexa app. Or, check to see if the device is compatible with the Kasa App.
The smart plug is offline on Alexa. Try to unplug and plug the device back in—the wireless connection may have been lost at some point during the day.
The device didn’t boot up correctly. Try to unplug and plug the device back in.
The device can’t connect to smart devices. Go to the settings in your smartphone, and manually connect it to the smart plug. Disable any VPN connection your phone may be using during the setup process. Unplug the plug and plug it back in, then repeat the steps above.
You can’t rename the smart device. Connect back to the smart plug’s Wi-Fi network and try again. Otherwise, uninstall and re-install the Kasa Smart app on your phone.
The device can’t connect to your network. The wireless signal may be too weak; if it is less than two bars, you’ll need to move the plug closer to your router. Also, you may want to make sure that the Wi-Fi you’re trying to connect the device to is the 2.4 GHz bandwidth.
You can’t press “Done” when setting up the plug in the Kasa Smart app/The device says “Almost done” but never finishes. Wait 15 seconds, then check the light on the smart plug. If the smart plug shows that it is connected to the network or if the light is blinking several times, don’t choose to start over.
See also:  How To Delete Alexa Account?

Source: )

Can Alexa connect to Kasa?

How to connect the Kasa Smart Wi-Fi Plug to Amazon Alexa The Kasa Smart Wi-Fi Plug is one of the simplest smart home devices you can buy today, and affordable too at just $17, depending on the style. You can easily link the device to just by setting up the Kasa Smart app, and then connecting this to the Amazon Alexa app, both on your mobile device.

  • How To Pair Kasa Smart Plug With Alexa In the Alexa app, select the Kasa Smart icon to set up your smart plug GearBrain
  • Getting started
  • After connecting and setting up your, open up your Alexa app and follow these steps:
  • • From the Home page, click on “Devices” at the bottom of the screen
  • • Click on the “+” button at the top right
  • • Click on “Add Device,” from the pop up menu
  • The app will ask you, “What type of device are you setting up?” Kasa is one of the bigger brands that works with Alexa, so the icon will be right along the top.
  • Click on the “Kasa” icon.

You’ll be told to set up your TP-Link Kasa app. This is actually now called, “Kasa Smart.” If you haven’t set this up, this review of the Kasa Smart Wi-Fi Plug, will walk you through that step.

  1. How To Pair Kasa Smart Plug With Alexa The Kasa smart plug is an easy way to start a smart home GearBrain
  2. After setting this up, you’ll now:
  3. • Click on “Continue” at the bottom of the screen
  • You’ll be taken to a screen to download and install the TP-Link Kasa,
  • Click on “Enable to Use” to install this skill.
  • You’ll then be asked to enter the email and password you used to set up the Kasa Smart app. Enter these, and then the Skill will be added to your Alexa app.

Before you can actually use the Kasa Smart Wi-Fi Plug, however, the app needs to discover it.

  • A pop up menu will ask permission to do this. Give this action permission.
  • It can take about 45 seconds for the Alexa app to locate, via Wi-Fi, the Kasa Smart Wi-Fi Plug.
  • After discovering the smart plug, it will ask permission to “Set Up Device.” Click on this button.
  • You can then add the plug to a group, like a specific room, or you can skip that step.
  • How To Pair Kasa Smart Plug With Alexa You can link the Kasa TP-Link app to the Amazon Alexa app GearBrain
  • Using Alexa with the Kasa Smart Wi-Fi Plug
  • Once you finish this step, all you need to do now is go into the Alexa app or speak to Alexa through an Alexa-enabled device like the, and you can turn on the light, a fan, or whatever you have plugged into the smart plug, just by asking, “Alexa, turn on the.”

Do keep in mind, you should remember what you’ve named the smart plug in the Kasa Smart app. You’ll want to ask Alexa to turn this on and off specifically. For example, “Alexa turn on the bedroom smart plug.” Alexa may offer you a suggestion if you’re pretty close to what you’ve called it.

Where is the 8 digit code on Kasa smart plug?

How to Set Up Your Kasa Smart Plug Using Seamless Setup in the Google Home App Seamless Setup allows you to quickly and easily set up your Kasa smart device in the Google Home app in just a few steps – there’s no need to download another app to link. And, the Google Nest device can act as a hub to connect your smart device to the web. A Kasa smart plug is used as an example.

  1. Set up your Google Nest or Home speaker or display, if you haven’t already done so.
  2. Plugin and turn on your smart plug.
  3. Open the Google Home app. Make sure you have the most recent version.
  4. At the top left, tap Add > Set up device > New device,
  1. Follow the in-app instructions to complete setup.
  2. Choose a home to set up the smart plug in and tap Next,

Your device will start to scan for nearby devices that are ready for setup.

Scan the Hey/OK Google code on your device. You can unplug your device in order to scan the QR code.

Or you can tap Continue without scanning at the bottom, then enter the 8-digit code on the bottom of the device, near the QR code with Hey/OK Google.

Plug in your plug in the same room as a Google Assistant-enabled device and turn it on. Wait about a minute before moving to the next step. Then confirm bridging is enabled on your Wi-Fi router.

Connect your plug to your Google account.

Choose a location for your plug. Then give your plug a name.

Connect the plug to a 2.4GHz Wi-Fi network. If you don’t have a 2.4GHz network, create one on your Wi-Fi router then restart setup.

Setup starts automatically.

When setup is ready, you can see your device on the home page.

Then the Kasa Smart app will discover the plug automatically. You can add it to your Kasa account for remote control.

See also:  Who Is Alexa From Bachelor Dating?

Google and Google Home are trademarks of Google LLC. Kasa Smart Plug is a plug by TP-Link Corporation Limited that pairs to a Google Account and uses Google services to connect to the internet. For setup and full feature access including remote control, mobile alerts, and software updates, Kasa Smart Plug requires a compatible assistive device (full list available at g.co/nest/assistivedevice ) and a working internet connection over Wi-Fi, the free Google Home app, and an active Google Account.

  1. Minimum requirements are available at g.co/nest/devicereq,
  2. Availability and performance of certain features are service-, device-, and network-dependent and may not be available in all areas.
  3. All features, functionality, and product specifications are subject to change without notice or obligation.
  4. Voice control with the Google Assistant requires a compatible smart device.

Google and related marks and logos are trademarks of Google LLC. Free Google Home app and an active Google Account. Working internet connection over Wi-Fi. One of the following compatible assistive device: Google Home, Google Home Mini, Nest Mini, Nest Hub Max, Nest Hub, Google Home Max.

  • Dissatisfied with product
  • Too Complicated
  • Confusing Title
  • Does not apply to me
  • Too Vague
  • Other

We’d love to get your feedback, please let us know how we can improve this content. Thank you We appreciate your feedback.Click to contact TP-Link technical support. : How to Set Up Your Kasa Smart Plug Using Seamless Setup in the Google Home App

Why is my Kasa not working with Alexa?

This Article Applies to: RE270K, HS100P3, KB100, EP40, KL130, KL110, HS107, KL110B, HS105 KIT, LB230, HS103, KL130B, LB130, HS300, KP115, HS105, LB110, KD110, HS220, HS200, HS100, RE370K, KB130, KP100, KP400, KL120, KP125, KP200, LB100 TKIT, LB200, HS100 KIT, LB120, KP105, HS210 KIT, LB100, KP303, HS110, HS210 This article will introduce how to connect TP-Link Kasa devices on your Amazon Alexa app.

Please open the Kasa App and sign in to your TP-Link account. No TP-LINK Account ?

Set up Kasa devices via Kasa APP at first and make sure they can be controlled by Kasa APP. Please refer to Smart plug/Switch or Smart Bulb to set up the Kasa device.

Note: For RE270K/RE370K, please make sure Remote Control is enabled on Kasa APP. Refer to this link to enable Remote Control feature for the RE270K/RE370K. Connect Kasa device to Amazon Alexa: 1. Open Amazon Alexa App, tap on “Home” icon in bottom right corner. Then click the “+” icon in the upper right corner and select “Add Device”. How To Pair Kasa Smart Plug With Alexa 2. Select “Kasa Smart” and tap on “Continue”. How To Pair Kasa Smart Plug With Alexa 3. Tap on “ENABLE TO USE”, type in your Kasa account and password, and then click “Authorize”. After authorized successfully, the App will remind that “TP-LINK Kasa has been successfully linked”. Tap “Done” to go to the next step. How To Pair Kasa Smart Plug With Alexa 4. Tap on “DISCOVER DEVICES” or use voice command “Alexa, discover devices”. Alexa will scan and show the devices bound to your Kasa account. How To Pair Kasa Smart Plug With Alexa 5. Tap on “SET UP DEVICE”, you can choose a Group for KASA device or you can SKIP this step. Tap on “DONE” to finish the set up. How To Pair Kasa Smart Plug With Alexa 6. You have now completed the setup process. You can select the device types and view what devices are discovered by Alexa. How To Pair Kasa Smart Plug With Alexa All discovered Kasa devices can be controlled through your Alexa device. Please test if it works normally with voice commands. For example, if a bulb on Kasa is named “Little Bulb”, we can say “Alexa, turn on the Little Bulb” and check if Alexa powers on this bulb.

Alexa fails to discover devices, how can I do?

  • Try to reboot the smart device and re-discover on Alexa.
  • Double check whether Kasa App can remotely control the device or not. If not, check your internet access and remote control settings.

Why does the device’s status Show “Offline” on Alexa?

  • Wireless connection could have been lost. Try reboot the device and re-discover on Alexa.
  • Internet access on your router could be unavailable.
  • The remote control function could have been turned off.
  • There is an issue with the cloud server.

Alexa has discovered the devices but cannot manage them, while via Kasa App you can.

For this situation please contact support for help, Is this faq useful? Your feedback helps improve this site. What’s your concern with this article?

  • Dissatisfied with product
  • Too Complicated
  • Confusing Title
  • Does not apply to me
  • Too Vague
  • Other

We’d love to get your feedback, please let us know how we can improve this content. Thank you We appreciate your feedback. Click here to contact TP-Link technical support.

Can you use Kasa smart plug without app?

Kasa devices without Kasa App Hi! As my username says, I’m a beginner in that great Home Assistant world. I had a simple question : can I use my Kasa switch without using the Kasa App? Right now, the switch has it’s own wi-fi, so (of course) Home Assistant won’t find it on it’s network. Thanks in advance! Look at the component and see if your switch is supported. It likely is and supports local control. I know my TP-Link bulb works fine without ever connecting to the internet. I’m open to correction on this, but, having six switches, you need the app to do the initial setup. Naming the switch and getting it on your network etc. After that you can always uninstall the app. Like already said, you need the app for the initial setup. After that the devices are in your network and you don’t need the app. When the switch has its own wifi, it isn’t completly installed yet. Hi! Thank you for your answers. I hoped I could do it without the app, but I doubted it worked like this. I used the app to configure the switch, then deleted it, and it works fine! Thanks again to have taken the time to answer! Once paired the switch with the Kasa app, I was able to get HA to find it and add it to my set up. Is there a way then to unpair it completely from the app then? Even if I delete the app, it seems like the switch is still linked to the Kasa account I had to setup and therefore the cloud, correct? Not sure about that. TBH, I’ve kept the app as occasionally HA throws an error while I’m away and drops one or two of the switches. Having the app in those circumstances is handy for me. I’ve kept the app, too. But I never created an account on the Kasa cloud. There’s a bit of a trick to that. You have to select “Create an account” during the app initiation, because there’s no other choice. But if you look closely, at the bottom of the next page, there’s an option to “Skip.” The documentation I read implies that this means the smart plug can now only work on your local network. Which is exactly what I wanted. HA is on my local network.2 Likes Thats exactly what I was looking for. Thanks! Nice sleuthing there. I have 3 of these coming in and the fact that I might be able to locally control them with no cloud in the middle is awesome One caveat: The HA integration to TP-Link is buggy. There are known problems, often reported here, which are apparently not on any developer’s plate to fix. Specifically, the devices can sometimes go “unavailable” because of brief network interruptions or interference. Also, if HA and the device are both powered up together, as after a power outage, HA may see them as unavailable if it starts first. The Kasa app is apparently OK by simply retrying. The HA integration gives up, and never attempts to reconnect again. Some things which have been reported to help are to assign static or reserved IP addresses for the devices, to make sure the network signal near the devices is solid, and to ensure that there is no interference from nearby networks on the same WiFi channel. I’ve done all these things and the reliability has vastly improved, but they still occasionally go unavailable in HA. The fix, for me, is to connect to the offending device via the Kasa app to verify it is reachable on the network (so far, it always is) and then re-start HA.1 Like Roger that, thanks for the info! I will just add, I have the HS300 and its VERY buggy with Home Assistant. Took multiple tries of getting HASS to recognize all 6 plugs and even then, a couple plugs go missing every once in a while. I was using them to power individual shelves on an enclosed plant stand lighting (one plug per shelf sort of thing) but the plugs go missing too often to be reliable for this use. Likely going back to a basic power strip with maybe some wemo plugs They seem to be way more reliable. OH, and I am using a static DHCP assignment for the power strip and I have added the TP Kasa config to the configuration.yaml file as opposed to a point-in-click integration. I’m not sure how much has changed in the codebase, but since maybe Nov or Dec 2020 when I built my new instance of Home Assistant, I haven’t had any real issues with Kasa / TP-Link devices. Yes, the fact that the switches are “local poll” is mildly annoying, but that’s only relevant if you want to use the switch to control other devices, and want a <20sec response time. Stability-wise? Pretty solid for me so far! I've seen the same thing as, I never see the TP-Link devices show "unavailable" in Lovelace any more. curious on the "skipping" the create and account. I like this option and totally missed it the first time, so everything is loaded under my account. would like to run locally, so when I logout and "skip", not of my devices show up. Is there a way to pull them in or do I need to re-pair every device? : Kasa devices without Kasa App

See also:  How To Connect To Alexa Without Wifi?